SN74LVC74ADR

In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. The package Cut Tape (CT)contains it. Currently, the output is configured to use Differential. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 1.65V~3.6V volts. A temperature of -40°C~125°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. A frequency of 150MHzshould be the maximum output frequency. A total of 14terminations have been recorded. The object belongs to the 74LVC74 family. Power is supplied from a voltage of 1.8V volts. The input capacitance of this JK flip flopis 5pF farads. This D flip flop belongs to the family of LVC/LCX/Z. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal.  The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchbase part number family. Vsup reaches 3.6V, the maximal supply voltage. To achieve this superior flexibility, 2 circuits are used. Considering its reliability, this T flip flop is well suited for TR. There are 3.3V power supplies attached to it. The output current of 24mA makes it feature maximum design flexibility. It has 1 output lines to operate. Despite external influences, it consumes 10μAof quiescent current.

Cut Tape (CT) package
74LVC series
14 pins
3.3V power supplies

There are a lot of Texas Instruments SN74LVC74ADR Flip Flops applications.